# 3D printers from e-waste

| qty | material | year | status |
| --- | --- | --- | --- |
| 4 → 8 / month | Scrap electronics, welded steel | 2017 | retired |

Ten months as product designer at AB3D in Nairobi, building 3D printers from electronic waste. While I was there, production went from 4 to 8 printers a month.

AB3D, African Born 3D Printing, was a tiny startup with a big idea: make 3D printers in Kenya, out of what Kenya throws away. The electronics came from e-waste dumps. The frames were welded by the jua kali, the street welders down the road. We put everything together in our own workshop. A printer sold for €400, training included.

We were five: Roy Ombatti, our CEO; Karl Heinz, our CTO and the engineer doing most of the building; two helpers; and me. Everyone wore all the hats. One day I was building printers, the next I was planning upgrades, drawing CAD models, making marketing material or talking to customers. I filmed every step of the build, so the whole process was on record. When buyers started asking how to use their printers, we turned that into tutorials. I built a website to host them and to market the startup.

My own angle was DFMA, design for manufacture and assembly, because that's what I wanted to tie back to my studies. The question: how do we make more printers, faster, with what we have?

## The jig

Every frame came back from the jua kali a little different, because each one was welded by hand. So we measured each frame and fed the numbers into the CAD model, and the printed parts made up for the skew. It worked, but it ate time.

The workshop already had a jig for nearly everything. Rough around the edges, but they worked. And the shop wanted to push production up. A welding jig for the jua kali felt like the perfect fit. It had to be built from what we had: the same square tubing the printers used, threaded rods and bolts.

The team loved it straight away. This was the link to the jua kali workshop we'd been looking for.

Then my first version made skew frames. About ten of them, properly skew. With so little material you can't afford many mistakes like that, and time costs money too. But the measuring we already did showed us where it went wrong, and we tuned the jig until the frames came out square. One printer now took nearly half the time to build. Production went from 4 to 8 a month.

## Everything else we printed

A printer is only as good as what you make with it, so we printed a lot. Plenty came from Thingiverse or were proven designs we reused, to show people what FDM printing can do. Some we designed ourselves:

- An education set for schools: a homo erectus skull for history class, a balance to explain moments in physics. We took it around schools in Nairobi for feedback.
- A dental display for Unilever Kenya, to teach kids how to brush their teeth. There was no other way to make it, so 3D printing it was.
- Our first e-NABLE hands: open-source prosthetics for kids born without fingers.
- A Raspberry Pi telescope for schools. Normally you import one, and when a part breaks you import that too. Now you just print a new one.
- A few gadgets with engineering students, like a laser tripwire against break-ins.

The hardest part wasn't technical. It was awareness. 3D printing in Kenya in 2017, out in rural schools: the gap in knowledge was huge. But closing that gap is what the maker movement is built on. It was hard work, and so rewarding to see the kids and the makers enjoy it that much.

## The microscope

The microscope was a product that came from the product. It's an open-source design from Tanzania: a 3D printed body around a hacked Logitech webcam. Plug it into a laptop or a phone and you zoom in up to 100x. It cost under $150, so far more doctors, hospitals and schools could have one.

We printed them on our own printers. I helped test them with doctors, and with farmers who study cow dung to catch disease early. From there it grew into a kit with Digital Blacksmiths and TechforTrade: a laser-cut wooden box, a manual and leaflets, ready to send out. I designed the box and the brochure, and we refined them as a team.

## Looking back

All of this fed straight into my thesis: [Emergency 3D](https://matthewbracke.com/made/emergency-3d), a printer you carry on your back into a disaster zone.

The project stopped when Karl left. If I could tell my 2017 self one thing: take the top spot and keep pushing. It was that rewarding.

Funny enough, I work at a CAD company now. Pure coincidence. But I'm still a tinkerer at heart. I visit maker labs, print things at home and keep designing. It still fascinates me, and it still drives me.
